![]() ![]() ![]() Receiver Sensitivity (dBm) -103.45 -120.53Maximum Allowable Path Loss (dB)ġ2 © .ltdFor internal use only Subcarrier Bandwidth (kHz)Noise Power per Subcarrier (dBm) Number of Received Subcarriers (dB) 27.8 10.8Thermal Noise Density (dBm/Hz) Interference Margin (dB) not selected not selectedInterference Margin (dB) 1.00 1.00 Neighbour Cell Load 50% 50%Method for Interference Margin User Defined User Defined Required SINR at Cell Edge (dB) -6.06 -1.35 Maximum SINR at Cell Edge (dB) -0.03. Minimum Required SINR (dB) -1.69 3.76Coding Rate Offset (dB) 0.20 0.34 If DL and UL considered -DL SINR requirement ≈ -3dB => RSRQ>-14.1dB, empty serving cell RSRQ>-15.5dB, fully loaded serving cell RSRP>-127dBm (1dB interference assumed)Ĭhannel ModelAntenna Configuration 1Tx-2Rx 1Tx-2RxįDPS Type Round Robin -Users in Frequency Domain per TTI 2 10įDPS Gain (dB) 0.00 -HARQ Gain (dB) 4.58 5.45 20W BTS Tx power If DL only considered: -SINR requirement ≈ -6dB => RSRQ>-16.9dB, empty serving cell RSRQ>-17.7dB, fully loaded serving cell RSRP>-130dBm (1dB interference assumed).Throughput requirement 500/64kbps (DL/UL).Typical coverage requirement is that 95% of the measurement samples is fulfilling the criteria.Coverage criteria for field measurement can be estimated with link budget tool. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |